In a world where our homes are cluttered with multiple remote controls for various devices, the GE Universal Remotes are game-changers. Seemingly, the GE Universal Remotes provide the ability to control multiple devices using a single remote control. However, to get such seamless control, you have to program the remote with desired devices using respective remote codes.
In that way, this article is all about programming the GE Universal Remote for your Insignia TV. If you have lost your Insignia TV remote and wondering about using the GE Universal remote for your TV, then make sure to read the article below for the complete guide.
Suggested for you – How to Turn on Insignia TV using Smartphone?
What is the GE Universal Remote?
If you have ever struggled with multiple remotes, a universal remote is the answer. The GE(General Electric) Universal Remote can be programmed to work with various devices, from TVs and soundbars to streaming devices. Here are some of the advantages;
- Consolidation: One remote to control all devices.
- Easy Setup: Most GE remotes are user-friendly and don’t require any tech-savvy skills.
- Cost-Effective: It is a more affordable option than buying multiple replacement remotes.
How to Program GE Universal Remote Codes for Insignia TV?
Seemingly, there are two ways to program the GE Universal remote to your Insignia TV. That is, you can program your TV either “with code or without code”. Below is the detailed guide.
How to Program GE Universal Remote Code for Insignia TV With Code?
Here are the steps to program the GE Universal remote for your Insignia TV using the dedicated codes.
Step1:
Turn on your Insignia TV. Make sure it is powered on so the remote can sync with it.
Step2:
Press and hold the “Setup” button on your GE universal remote until the red indicator light stays on. (If your remote does not have a “Setup” button, you might have a “Code Search” button instead.)
Step3:
Press the “TV” button on the remote. The red light should blink once and then stay lit, showing it’s in programming mode for a TV.
Step4:
Enter the code for Insignia TV you found in the previous section. Enter the code using the number keys on your remote. For example, if the code is 0001, press 0-0-0-1.
Codes for Insignia TV:
CL3 – 2891, 0371, 2271, 0581, 0701, 0871, 0921, 1241, 1381, 2241, 2921, 3761, 3841, 4371, 4721, 4761, 5051, 5061, 5181
CL4 – 0921, 2891, 6171, 0371, 2271, 0141, 0581, 0871, 2241, 6181, 2921, 3761, 4371, 4721, 4761, 5051, 5061, 5181
CL5/6 – 2891, 0371, 6381, 6171, 2271, 0141, 6481, 0581, 0871, 0921, 2241, 6181, 2921, 3761, 4371, 4721, 4761, 5051, 5061, 5181
Codes for Insignia Roku TV:
CL5 – 6171, 6381
Codes for Insignia Fire TV:
CL6 – 6381, 6171
Step5:
Point the remote at your TV and press the “Power” button. If the TV turns off, congratulations! The code worked, and your remote is now programmed.
Step6:
Press the “Setup” button one more time to lock in the code. The red light should turn off, indicating that the code is saved.
Check this article – How to Pair Insignia TV Remote?
How to Program GE Universal Remote Code for Insignia TV Without Code?
Step1:
Turn on your Insignia TV. Your TV must be powered on to detect the right signal.
Step2:
Press and hold the “Setup” button on your remote until the red indicator light stays on.
Step3:
Following that, press the “TV” button on the remote. The red light will blink once and stay on.
Step4:
Press and release the “Power” button repeatedly. You will need to do this slowly and wait a second or two between each press to give the remote a chance to find the right signal. Each time you press “Power,” the remote will send out a different code to the TV.
Step5:
Stop when the TV turns off. When the TV finally powers off, you’ve found the right code.
Step6:
Further, lock in the code by pressing the “Setup” button again. The red light will turn off, saving the code in the remote.
Step7:
Finally, to check that the TV and the remote are synced, you can try performing some basic functions like power on/off, and volume up/down.
Troubleshooting Common Problems
Sometimes, even after entering codes or following the auto-search method, you might still have trouble syncing your GE remote with your Insignia TV. Here are some troubleshooting tips that might help.
- Remote Not Responding: If the remote isn’t responding at all, check the batteries. Weak batteries can prevent the remote from sending strong enough signals.
- TV Does Not Respond to Power Button: Double-check the code you entered or try a different code. For some TV models, a specific code may be needed.
- Unresponsive Buttons: After programming, some buttons may not work, like “Volume” or “Input.” This happens when the remote code doesn’t cover all TV functions. In that case, retry programming with a different code.
- Remote Reset: If nothing seems to work, you may need to reset the remote and start fresh. To do this, remove the batteries for 10-15 minutes and reinsert them. Then, try the programming steps again.
Final Note
That is all to say about the GE Universal Remote Codes for Insignia TV. I hope you have found the respective code for your Insignia TV and the remote is working fine. This guide will serve the best for people who lost their Insignia TV remote and wondering about the best alternative source. Moreover, you can use this single remote to control multiple devices and get rid of maintaining multiple remotes.